LR 3 | Replacing the Drawer Liner

Created by Ken MacCormick, Modified on Sat, 28 May 2022 at 04:56 AM by Ken MacCormick

Always use a drawer liner to make it quick and easy to empty the waste drawer and keep things clean. Litter-Robot custom-fit waste drawer liners are biodegradable and fit perfectly in the waste drawer. They are available in packs of 25, 50, or 100, and can be ordered on under Accessories. You can also use any 40-50 litre trash bag to line the waste drawer. The installation steps are the same for both types of bags.



  1. Open a new drawer liner or trash bag and roll down the edges about four times.
  2. Start at the back and push the rolled edge of the bag into each of the four tabs, keeping the bag taut as you work forward. Make sure the bag is taut across the back and sides, then pull the slack forward toward the carbon filter.



  • Make sure the bag does not come up past the top of the sides of the waste drawer. You want to make sure the bag sits below the edges, so it cannot be seen by the Drawer Full Indicator lenses and potentially report a false flashing blue Drawer Full Indicator light on the control panel. 

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons

Feedback sent

We appreciate your effort and will try to fix the article